Showing posts with label brow lamination. Show all posts
Showing posts with label brow lamination. Show all posts
If like me you've been adoring other people's fluffy laminated eyebrows, you've come to the right place! This is my step-by-step, easy-to-follow, at home brow lamination tutorial. I'm showing you how to do the treatment yourself and everything you'll need to do it at home. This how-to tutorial is also available in youtube video format at the bottom of this page.
DISCLAIMER
Please be careful when you're doing this treatment and also read all of the instructions within the kit you are using. If you are not confident or do not have a steady hand it's best to visit a brow technician instead.
WHAT YOU WILL NEED
1 -A brow lamination kit OR lash lift kit
I use a lash lift kit by Iconsign which is available HERE and includes all the solutions (perm, fixation, cleanser, and nutrition), glue, and tools. Most lash lift kits and brow lamination kits contain the same products, so you can use either.
2 - Cotton rounds and earbuds
These are used for any cleanup needed
3 - Cling film (also known as saran wrap or plastic wrap)
This will be used to hold your eyebrow hairs in place during the process
HOW TO DO A BROW LAMINATION AT HOME GUIDE
STEP ONE - Cleanse the area
Apply the cleanser to a cotton round and thoroughly clean your brow area. Then brush your hairs upwards into your desired position. Do not worry if they don't go all the way up right now, just aim to get them a big higher.
STEP TWO - Apply the perm solution
Apply the perm solution all over your eyebrows using a small applicator, making sure all the hairs are coated. Whilst you're doing this try to push your eyebrows up into your desired position.
Once you have applied the perm solution, cover your brows with the cling film and set your timer for 5 minutes or the amount of time your kit recommends.
Half way through at 2:30 peel off the cling film and use a small spoolie brush to brush your eyebrows up into your desired position. They will be far easier to position and style now as the perm solution has started working. Once brushed cover them with the plastic again for the remaining time.
Once the time is over, clean off the remaining solution using the flat side of the Y brush or a cotton bud. Afterwards use a slightly damp cotton round to make sure everything is removed.
STEP THREE - Apply the fixation solution
Apply the fixation solution all over your eyebrows using a small applicator, making sure all the hairs are coated. Be sure to use a fresh applicator for this. Whilst you're doing this push your eyebrows up into your desired position. They will be easier to style now.
Once you have applied the fixation solution go in with a small spoolie brush and brush your brows up into the final position you would like them to set in.
Once in position, cover you brows with cling film again (a fresh piece) and leave this on for 5 - 7 minutes, or however long your kit advises you to.
Once the time is over clean off the remaining solution using the flat side of the Y brush or a cotton bud. After use a slightly damp cotton round to make sure everything is removed.
STEP FOUR - Apply the nutrition solution
Using a cotton bud apply the nutrition solution all over your brows. Use a clean spoolie to brush the nutrition through your eyebrows. Leave this on for 5 minutes, or however long your kit advises.
Once the time is over, remove the nutrition solution with a cotton round.
BROW LAMINATION AFTERCARE
Here's what you need to know about caring for your eyebrows after a brow lamination:
- Do not get your eyebrows wet for at least 24 hours
- Avoid brow makeup for at least 24 hours
- Keep your eyebrows in a brushed up position. If you move them whilst changing or sleeping just brush them up again
VIDEO TUTORIAL
You can check out my video tutorial below for a demonstration of how to do this treatment, and I also explain everything else you need to know. This video includes before and after videos/pictures, aftercare advice and styling advice.
I hope you found this helpful! Please like and share this blog post or the video if you did.
Until next time, J xx
Subscribe to:
Posts (Atom)
Social Icons